LOCTITE LB 8150 Silver Anti-Sieze

TYPICAL PROPERTIES

• Chemical Type:
  • Mineral Oil
  • Lithium Soap
  • Graphite
  • Aluminum
  • EP-additives
• Appearance: Grey
• Odor: Oily
• Density:
  • 0.9 g/ml at 25 °C (ISO 2811-1)
• Consistency:
  • NLGI Class 1 (ISO 6743-99)
• Penetration:
  • 310 to 340 (1/10 mm at 25 °C, 60 strokes, ISO 2137)
• Weld Load (4-Ball Test, ASTM D2596):
  • 4,400 N
• Weld Scar:
  • <4.0 mm
• Wear (1 hour / 400 N):
  • 0.95 mm
• Copper Corrosion (ISO 2160):
  • 1b (3 hours @ 100 °C)
• Peak Temperature:
  • 900 °C
• Flash Point: Refer to Safety Data Sheet (SDS)

APPLICATIONS

• Protects threaded connections and fittings in high-temperature environments (up to 900 °C).
• Suitable for use in combustion engine exhausts and oil and gas burner applications.
• Prevents seizing or jamming in high-temperature joints.

STORAGE

• Optimal Storage Temperature: 8 °C to 21 °C
• Storage Conditions: Keep in a dry location in the unopened container.
• Avoid: Storing below 8 °C or above 28 °C as it can negatively affect product properties.

DIRECTIONS FOR USE

1. Ensure surfaces are clean and free from contaminants before application.
2. Apply a thin, even layer to the parts that require lubrication. Avoid excessive application.
3. Do not return used material to the original container to prevent contamination.

SAFETY AND HANDLING

• This product is not recommended for use in pure oxygen or oxygen-rich environments and should not be used with strong oxidizers like chlorine.
• For safe handling information, refer to the Safety Data Sheet (SDS).

DISCLAIMER

The information provided in this Technical Data Sheet (TDS) is based on Henkel’s knowledge and experience at the time of publication. Users are encouraged to conduct their own tests to determine suitability for specific applications. Henkel disclaims any liability for product performance or results obtained from its use outside of recommended conditions.

For additional technical support, visit: www.henkel.com/industrial