MOLYKOTE Metal Protector Plus 400 ml – Transparent Corrosion Protection Coating

MOLYKOTE Metal Protector Plus 400 ml is a wax-based corrosion-protection coating designed to protect suitable metal parts during storage, transportation and periods of equipment inactivity. Manufactured by DuPont under the MOLYKOTE brand, this product forms a transparent protective film intended to provide long-term corrosion protection while maintaining a low coefficient of friction.

The coating is particularly relevant to industrial maintenance, manufacturing, machining and automotive service environments where metal components may need temporary or extended protection from corrosion. The transparent film also allows the underlying metal surface and identifying markings to remain visible.

Key Features of MOLYKOTE Metal Protector Plus

1. Long-Term Metal Corrosion Protection

MOLYKOTE Metal Protector Plus is formulated to protect metal parts against corrosion during storage and transportation. Its wax-based protective film helps shield suitable metal surfaces from environmental exposure. Actual protection duration depends on surface preparation, coating application, storage conditions and exposure severity.

2. Transparent Protective Film

The product forms a transparent coating, helping users inspect the treated component without a strongly opaque finish. This can be useful when protecting machined parts, metal assemblies and components that need to remain identifiable during storage or handling.

3. Wax-Based Formulation

The product uses a synthetic wax, corrosion inhibitor and solvent-based formulation. After application and drying, the remaining film provides the intended protective properties. Follow the product’s technical documentation for application thickness, drying time and suitability for the substrate.

4. Low Coefficient of Friction

The manufacturer lists a low coefficient of friction as one of the product’s performance benefits. The coating may therefore be useful on appropriate metal components where corrosion protection and low-friction surface characteristics are desirable. It is not a substitute for a specified operational lubricant where a separate lubricant is required.

5. Convenient Aerosol Application

The 400 ml aerosol format offers a convenient way to apply the coating to compatible metal surfaces. Spray application can be practical for maintenance departments, workshops and component storage operations. The aerosol format should be confirmed against the supplied packaging label before ordering.

Typical Applications

MOLYKOTE Metal Protector Plus is designed primarily for corrosion protection of metal parts that need to be stored or transported. Potential applications include:

• Machined metal components awaiting assembly
• Suitable industrial equipment parts during storage
• Metal components being prepared for transportation
• Machining spindles and compatible precision components
• Automotive and engineering workshop parts
• Metal assemblies during planned equipment shutdowns
• Other suitable metal surfaces requiring a transparent protective coating

Confirm the coating’s compatibility with the substrate and the component’s future operating conditions before use. For components that will subsequently be painted, bonded, lubricated or assembled, verify whether the protective film must be removed first.

Application Instructions

Prepare the metal surface according to the manufacturer’s instructions. Remove contaminants that could interfere with coating adhesion or corrosion protection, including dirt, grease and loose corrosion products where applicable.

Apply the product by spraying or another method authorised by the current technical data sheet. Allow the coating to dry under the recommended conditions before packaging, handling or storing the component. The referenced technical information gives an approximate room-temperature drying time of 90 minutes; actual drying can vary with film thickness, ventilation and ambient conditions.

If additional protection is needed, follow the manufacturer’s recommendations for multiple coats and the drying interval between applications. Do not assume the coating is suitable for every metal, elastomer, plastic, paint system or electrical assembly.

Product Specifications

• Brand: MOLYKOTE
• Product: Metal Protector Plus
• Product type: Wax-based corrosion-protection coating
• Pack size: 400 ml aerosol, as specified in this listing
• Appearance: Transparent protective film
• Formulation: Synthetic wax, corrosion inhibitor and solvent
• Primary purpose: Corrosion protection of suitable metal parts during storage and transportation
• Additional property: Low coefficient of friction, according to manufacturer information

The manufacturer’s product information lists a temperature range of -40°C to +66°C. Confirm the exact meaning and applicability of these limits in the current technical data sheet before using them as service-temperature specifications.

Safety and Storage

MOLYKOTE Metal Protector Plus contains solvents and must be handled according to the current product label and safety data sheet. The referenced safety documentation identifies flammable-liquid and vapour hazards. Keep away from heat, sparks and open flames, avoid breathing spray mist or vapours, and use only with suitable ventilation and protective equipment.

Store the product in accordance with the label and applicable regulations. Do not spray near ignition sources, and allow the coating to dry before exposing the treated component to conditions that could create an ignition hazard.

Order MOLYKOTE Metal Protector Plus 400 ml

Order MOLYKOTE Metal Protector Plus 400 ml from Technosteer Online for suitable industrial maintenance, machining, component storage and metal corrosion-protection requirements. Confirm pack availability and application compatibility before purchase, particularly where the coated parts will later be assembled or returned to service.