BIRKOSIT Dichtungskitt High-Temperature & High-Pressure Industrial Sealing Compound

↓26% Original price was: ₹12,000.00.Current price is: ₹8,900.00.

BIRKOSIT Dichtungskitt is a single-component, reddish-brown industrial sealing compound designed for metallic joints exposed to extreme temperatures and pressure. Its permanently elastic, paste-like formulation is suitable for smooth, prepared sealing surfaces in steam turbines, gas turbines, compressors, generators, pumps, valves, gear units and marine engines.

The manufacturer specifies temperature resistance up to 900°C and pressure resistance up to 250 bar for sealing surfaces and joints, with higher stated pressure limits for certain flange and threaded connections.

41 Items sold in last month
Description

BIRKOSIT Dichtungskitt – High-Temperature and High-Pressure Sealing Compound

Industrial machinery operating under demanding temperature and pressure conditions requires dependable sealing at metallic joints. BIRKOSIT Dichtungskitt is a specialised industrial sealing compound developed for applications where conventional sealing materials may not meet the required operating conditions.

Its single-component, paste-like formulation remains permanently elastic and is designed for use on smooth, prepared metallic sealing surfaces. It is particularly relevant to power generation, industrial plant engineering, marine equipment and heavy machinery maintenance.

BIRKOSIT Dichtungskitt for Extreme Operating Conditions

BIRKOSIT Dichtungskitt is manufactured for sealing metallic joints where temperature, pressure and process-related vibration place demanding requirements on the sealing material.

The manufacturer’s product data sheet specifies temperature resistance up to 900°C. For pressure performance, the published limits depend on the type of joint: up to 250 bar on sealing surfaces and butt joints, up to 450 bar for flanges without sealing rings, and up to 550 bar for threaded connections. These ratings must be interpreted according to the manufacturer’s application instructions and the actual joint design.

Single-Component, Permanently Elastic Formula

Unlike two-part epoxy repair compounds, BIRKOSIT is supplied as a ready-to-use, single-component paste. It does not require mixing a resin and hardener before application.

The reddish-brown compound retains permanent elasticity rather than curing into a rigid material. According to the manufacturer, it remains flexible and does not change consistency during the assembly period. This characteristic allows components to be aligned after application and supports demanding industrial sealing procedures.Industrial Turbine and Power Generation Sealing

BIRKOSIT Dichtungskitt is primarily used for sealing metallic joints in industrial equipment where reliable joint performance is essential.

Typical applications include:

  • Steam turbines
  • Gas turbines
  • Compressors
  • Generators
  • Turboexpanders
  • Industrial pumps
  • Valves and gear units
  • Flange connections
  • Equipment housings
  • Marine engines
  • Power-generation equipment
  • Industrial plant maintenance

These applications require appropriate surface preparation, joint geometry and assembly procedures. The product should be selected in accordance with the manufacturer’s technical guidance and the equipment manufacturer’s requirements.

High-Temperature Resistance up to 900°C

One of the main characteristics of BIRKOSIT Dichtungskitt is its specified resistance to elevated temperatures. The manufacturer lists resistance to hot steam, air, hot and cold water, coolants, oils, lubricants and certain chemical gases at temperatures up to 900°C.

The stated temperature rating should not be interpreted as a universal guarantee for every fluid, joint configuration or operating cycle. Actual suitability depends on the medium, operating pressure, surface condition, joint design and application procedure. Refer to the current technical data sheet for the relevant service conditions.

Pressure Resistance for Metallic Joints

The compound is designed for demanding metallic sealing interfaces. Published manufacturer pressure limits include:

  • Up to 250 bar: sealing surfaces and butt joints
  • Up to 450 bar: flanges without sealing rings
  • Up to 550 bar: threaded connections

These values apply to the specified joint categories and manufacturer’s conditions; they should not be combined into a single universal pressure rating. Confirm compatibility with the actual assembly before use in high-pressure equipment. Surface Preparation and Application

Correct application is important to achieving the intended sealing performance.

The manufacturer recommends bringing the tin to room temperature to improve spreadability. Apply the compound to dry sealing surfaces on both sides using a brush or spatula, with a typical layer thickness of 0.2–0.3 mm.

The manufacturer’s instructions state that the assembled connection can be loaded immediately and that the compound permits subsequent alignment work. Application must still follow the equipment manufacturer’s procedures and any applicable maintenance or safety requirements. Suitable for Prepared, Smooth Sealing Surfaces

BIRKOSIT is intended for prepared or machined sealing surfaces. The product data sheet states that damage up to approximately 0.2 mm on suitable sealing surfaces can be compensated for using the compound.

For isolated cavities or more extensive surface damage, the manufacturer recommends considering compatible products from its FILLING range instead. BIRKOSIT should not be treated as a universal filler for deep gaps or severely damaged surfaces.

Storage and Product Life

The manufacturer’s current product information specifies a shelf life of five years in an unopened tin when stored correctly. After opening, the tin should be closed properly to preserve the remaining material.

The manufacturer also states a service-life guarantee of up to ten years when the product is used as intended and according to its instructions. This refers to the stated application conditions and should not be presented as a blanket guarantee for every installation. Why Choose BIRKOSIT Dichtungskitt?

  • Single-component industrial sealing compound
  • Permanently elastic paste-like formulation
  • Manufacturer-specified temperature resistance up to 900°C
  • Joint-specific pressure ratings for demanding applications
  • Suitable for metallic sealing surfaces
  • Designed for turbines, compressors, generators and pumps
  • Applicable to prepared flange and butt joints
  • Allows subsequent alignment during assembly
  • Suitable for power generation and industrial maintenance
  • Manufacturer application and machining guidelines available

For critical equipment, confirm the joint type, operating medium, temperature, pressure and surface condition against the current manufacturer’s documentation before selecting the compound.

Reviews (0)
0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.