ESAB Cutogen 5 Blowpipe 90° 450mm with A 3/64″ Cutting Nozzle

ESAB Cutogen 5 Blowpipe – 450mm Gas Cutting Torch

The ESAB Cutogen 5 Blowpipe is a robust injector-type hand cutting blowpipe designed for professional gas cutting applications. This configuration features a 90° head, 450mm overall length and an A 3/64″ cutting nozzle, making it suitable for industrial metal-cutting operations.

The Cutogen 5 is designed with a focus on gas-flow control, mechanical durability and safe operation. Its forged-brass body and head provide a strong construction for demanding workshop, fabrication and industrial environments.

90° Cutting Blowpipe Design

This version of the ESAB Cutogen 5 Blowpipe has a 90° angled head configuration. The angled design can be useful when the operator needs improved access and positioning around the workpiece during gas cutting operations.

ESAB Cutogen 5 configurations are also available with different head arrangements, including 180° versions. The exact configuration should therefore be confirmed when ordering replacement or additional equipment.

450mm Length

The ESAB Cutogen 5 Blowpipe has a length of 450mm, providing useful reach between the operator’s hand position and the cutting area.

The longer hand-held configuration can be advantageous when working around larger workpieces or when additional clearance between the operator and the cutting zone is required.

A 3/64″ Cutting Nozzle

This product is supplied with an A 3/64″ cutting nozzle. The nozzle forms part of the cutting system and provides the controlled gas outlet required to generate the heating and cutting flame.

The correct nozzle must always be selected according to the material thickness, fuel gas, gas pressures and manufacturer’s cutting recommendations.

Injector-Type Cutting Torch

The ESAB Cutogen 5 Blowpipe uses an injector-type design. Its gas-flow geometry is designed to support controlled gas delivery and help prevent backflow.

The product is intended for professional gas-cutting operations using suitable oxygen and fuel-gas supplies. The Cutogen 5 can be configured for acetylene or LPG when the appropriate nozzle is used.

Forged Brass Construction

Both the body and head of the ESAB Cutogen 5 Blowpipe are manufactured from forged brass according to the current Technosteer product specification.

Forged construction eliminates casting porosity and provides a robust body suitable for demanding industrial service. It also contributes to the durability required when the blowpipe is used regularly in fabrication and metal-cutting environments.

Controlled Gas Flow

Gas-flow geometry is an important part of a cutting blowpipe. The Cutogen 5 is designed to provide controlled gas flow while helping prevent backflow and reducing the risk of flashback.

The laminar gas-flow design is intended to support efficient cutting and controlled gas consumption.

Swaged Nozzle Design

The ESAB Cutogen 5 Blowpipe uses swaged nozzles designed to produce a parallel heating-flame beam. This helps support efficient heating of the workpiece during gas cutting.

The product information also states that the nozzles can be refaced, allowing their service life to be extended when properly maintained.

Cutting Capacity

The Cutogen 5 is specified for cutting mild steel up to approximately 300mm thickness, when used with the appropriate nozzle, fuel gas and operating conditions.

Actual cutting capability depends on the selected nozzle, gas pressures, material condition, cutting technique and other operating parameters. Do not assume the maximum capacity applies to every nozzle configuration.

Standard Supply

The standard set for this configuration includes:

• ESAB Cutogen 5 blowpipe
• A 3/64″ cutting nozzle
• Oxygen hose nut and nipple
• Fuel-gas hose nut and nipple
• 10mm hose connections
• Guarantee card
• Cutting data card

The supplied components should be checked against the actual package received before publishing a definitive package-content claim.

Industrial Applications

The ESAB Cutogen 5 Blowpipe is suitable for professional gas-cutting applications including:

• Mild-steel cutting
• Heavy fabrication
• Structural steel cutting
• Shipyard work
• Industrial maintenance
• Construction
• Metal preparation
• Workshop fabrication
• Scrap and plate cutting
• General engineering

Key Features

• ESAB Cutogen 5 cutting blowpipe
• Injector-type design
• 90° head configuration
• 450mm length
• A 3/64″ cutting nozzle supplied
• Forged-brass body and head
• Controlled gas-flow geometry
• Laminar gas flow
• Swaged nozzle design
• Designed to reduce backflow risk
• Suitable for acetylene or LPG with suitable nozzle
• Cutting capacity up to 300mm mild steel
• Designed for professional industrial use
• Conforms to IS 7653-1975 and BS EN ISO 5172-1997 according to the current product listing

Why Choose ESAB Cutogen 5 Blowpipe?

The ESAB Cutogen 5 Blowpipe provides a robust solution for professional gas-cutting applications where reliable handling and controlled gas delivery are important.

Its forged-brass construction, injector-type configuration and swaged nozzle design make it suitable for demanding metal-cutting environments. The 450mm length and 90° head provide a practical configuration for cutting operations, while the included A 3/64″ nozzle makes the product ready for the applicable cutting setup.

For fabrication companies, industrial workshops, construction teams and maintenance professionals, the Cutogen 5 is a practical choice for heavy-duty mild-steel gas cutting.

Important Safety Information

Gas cutting involves oxygen and fuel gases under pressure and produces high temperatures, sparks and molten metal. Use the blowpipe only with compatible regulators, hoses, flashback protection and approved gas connections.

Always follow ESAB operating instructions, recommended gas pressures and nozzle-selection information. Inspect hoses, connections, nozzle condition and the blowpipe before use. Never operate damaged gas-cutting equipment.