MOLYKOTE G-Rapid Plus Paste – 1 Kg Pack

Product Overview

MOLYKOTE G-Rapid Plus Paste is a mineral-oil-based solid lubricating paste formulated for assembly, press-fitting and running-in of metallic components. It contains solid lubricants, including molybdenum disulfide (MoS₂), graphite and white solids, to support low-friction movement and protection against wear under demanding conditions.

The product is designed for machine elements that experience high contact pressure, low-speed movement, slight or intermittent motion, or friction during assembly. The 1 kg can is a practical option for industrial maintenance teams, engineering workshops and machinery service providers.

MOLYKOTE G-Rapid Plus Paste is a specialist assembly and lubrication product. It should be selected according to the equipment manufacturer’s specifications and the operating conditions of the component.

Key Features and Benefits

Low Coefficient of Friction

The paste is designed to provide a particularly low coefficient of friction. This helps reduce friction during component assembly, press-fitting and running-in operations when the product is used as recommended.

High Load-Carrying Capacity

Its solid-lubricant formulation supports high load-carrying performance in suitable applications. The manufacturer reports a four-ball weld load of 5,300 N and an Almen-Wieland machine OK load greater than 20,000 N under the specified test methods.

Protection Against Seizure and Scoring

MOLYKOTE G-Rapid Plus Paste helps prevent seizure and scoring between compatible metallic contact surfaces. This can be useful during press-fitting, assembly and operation of selected mechanical components.

Reduced Stick-Slip and Fretting Corrosion

The paste is designed to suppress stick-slip and reduce fretting corrosion. These properties are relevant to machine components exposed to slight, intermittent or oscillating movement.

Easier Disassembly

By helping control friction and seizure at suitable contact surfaces, the product can facilitate disassembly during later maintenance. The result depends on the assembly design, exposure conditions and application method.

Wide Service Temperature Range

The manufacturer’s technical data lists a service temperature range of approximately −35°C to +450°C. This range applies to the product under the manufacturer’s stated conditions and does not guarantee suitability for every load, speed or application.

Applications of MOLYKOTE G-Rapid Plus Paste

MOLYKOTE G-Rapid Plus Paste is intended for a range of industrial assembly, running-in and lubrication tasks, including:

• Press-fit assembly: Assembly of compatible machine elements using press-fitting processes.
• Running-in of new machinery: Initial lubrication of suitable new machines and gears.
• Threaded spindles and screws: Lubrication of compatible screw drives and threaded machine elements.
• Gears and gear mechanisms: Selected tooth gearing, worm gearing and transmission components.
• Bearings: Fitting of suitable ball and roller bearings and lubrication of approved bearing contact points.
• Pumps and fittings: Selected mechanical components where the paste is specified.
• Machine-tool guides: Lubrication of compatible guides, slides, ways and tracks.
• Splined shafts and pulleys: Assembly and lubrication of suitable components.
• Wheel flanges and bolts: Lubrication of specified contact surfaces and fasteners.
• Metalworking operations: Selected drilling, sawing and thread-cutting applications.

These examples describe intended application areas rather than approval for every machine. Check the component manufacturer’s recommendations, especially for high-speed bearings, precision assemblies and applications requiring a specific friction coefficient.

Technical Characteristics

MOLYKOTE G-Rapid Plus Paste is a black, mineral-oil-based lubricating paste with an NLGI Grade 2 consistency. Its solid lubricants include MoS₂, graphite and white solids.

The manufacturer’s technical data lists a density of approximately 1.40 g/ml at 20°C and unworked penetration of 255–275 in units of 0.1 mm. These are typical properties, not guaranteed specifications for every batch.

For critical applications, consult the latest technical data sheet for the exact product supplied.

Application Instructions

Clean the sliding surfaces or contact areas before applying the paste. The manufacturer recommends applying it with a brush, cloth, synthetic sponge or suitable leather applicator.

Apply a thin, even layer to the intended contact surfaces. Do not use excessive quantities as you might with conventional grease lubrication. Rubbing the paste firmly into the metal surface can improve adhesion.

Do not mix MOLYKOTE G-Rapid Plus Paste with greases or oils. Follow the equipment manufacturer’s instructions when changing lubricants or preparing components for assembly.

For handling, storage and disposal, read the current Safety Data Sheet (SDS) and the product label. Use appropriate protective equipment and follow the specified precautions.

Why Choose the 1 Kg Pack?

The 1 kg pack is suitable for industrial workshops, maintenance departments and engineering businesses that require a dedicated assembly and running-in paste.

Before purchasing, confirm the exact product name, package size and supplier documentation. For critical assemblies, verify that the product’s friction characteristics and application guidance meet the component manufacturer’s requirements.

Buy MOLYKOTE G-Rapid Plus Paste from Technosteer Online

Technosteer Online supplies industrial products and maintenance materials for commercial and industrial customers. If you require MOLYKOTE G-Rapid Plus Paste – 1 Kg Pack, enquire about current availability, pricing and commercial supply options.

Select the product based on the assembly process, contact materials, operating temperature and equipment requirements. Refer to the manufacturer’s technical data sheet and safety documentation before use.

Explore More Industrial Products

Browse industrial products and supplies at Technosteer Online.

You can also explore Hylomar Universal Blue gasket jointing compound and Anabond 202 cyanoacrylate adhesive.

For product-specific information, read the official MOLYKOTE G-Rapid Plus Paste technical data sheet and the manufacturer’s official product page.