MOLYKOTE TP-42 Paste – 1 Kg Pack

MOLYKOTE TP-42 Paste is a high-adhesion industrial lubricating paste formulated for metal-to-metal sliding contacts exposed to high loads, water and metalworking emulsions. Supplied in a convenient 1 kg can, this light-beige paste is particularly associated with machine chucks and clamping elements, where reliable lubrication and protection of sliding surfaces are important for consistent machine operation.

Developed by MOLYKOTE, a specialty lubricant brand from DuPont, TP-42 combines mineral oil, synthetic oil, lithium soap, solid lubricants and an adhesion improver. Its formulation supports lubrication under demanding conditions and helps reduce problems associated with stick-slip, galling, fretting and corrosion. Official product information.

Key Features of MOLYKOTE TP-42 Paste

• High load-carrying capability: Designed for heavily loaded sliding surfaces and metallic friction combinations.
• Strong surface adhesion: Helps maintain a lubricating film on appropriately prepared components.
• Resistance to washout: Particularly resistant to water and metalworking emulsions under suitable application conditions.
• Reduced stick-slip: Helps support smoother movement of compatible sliding components.
• Anti-galling protection: Helps protect metal contact surfaces against galling and wear.
• Corrosion and fretting protection: Supports protection of treated metal surfaces in appropriate industrial operating environments.
• Industrial 1 kg pack: Suitable for maintenance teams and workshops requiring a larger quantity of specialist lubricant.

Applications of MOLYKOTE TP-42 Paste

MOLYKOTE TP-42 Paste is recommended for selected industrial sliding surfaces exposed to high pressure and moisture or metalworking emulsions. It is particularly suitable for the following applications when confirmed against the equipment manufacturer’s lubrication requirements:

Machine Chucks and Clamping Elements

The paste is used as a chuck paste for compatible metalworking machine chucks and clamping elements. Its adhesive properties help maintain lubrication on sliding contact surfaces.

Slides, Guides and Tracks

Suitable applications include compatible metal slides, guides and tracks where high loading and resistance to washout are important considerations.

Plain Bearings, Bushings and Sleeves

TP-42 may be used on suitable metallic plain-bearing arrangements, bushings and sleeves when the design and operating conditions call for this type of adhesive grease-paste.

Assembly and Run-In Operations

It can be considered for specified assembly and run-in applications involving compatible metallic friction combinations. Always follow the machinery manufacturer’s instructions for the exact component and lubrication point.

Technical Performance and Operating Range

DuPont identifies MOLYKOTE TP-42 as a mineral-oil-based anti-seize paste with solid lubricants. Its published typical service temperature range is -25°C to +250°C for the solid-lubricant system. This range should not be interpreted as a guarantee that every component of the supplied paste remains unchanged across the entire range.

The manufacturer’s technical data sheet reports a typical density of approximately 1.19 g/ml at 20°C, an NLGI grade of 2, and a light-beige appearance. These are typical values, not specification limits. Actual performance depends on the application, surface condition, loading, operating environment and maintenance procedure.

Application Instructions

1. Review the equipment manufacturer’s lubrication instructions and confirm that TP-42 is suitable for the intended contact surfaces.
2. Clean the sliding surfaces to remove contaminants and incompatible lubricant residues.
3. Apply the paste using a suitable brush, rag or grease gun, as appropriate for the component.
4. Use the quantity and application method recommended for the machinery.
5. Do not mix MOLYKOTE TP-42 Paste with other greases or oils. Follow the official technical and safety data sheets for handling, storage and use.

Why Choose the 1 Kg Pack?

The 1 kg can is a practical pack size for industrial maintenance departments, machine shops and workshops that regularly service compatible clamping and sliding components. It provides a ready supply of specialist lubricant for planned maintenance and equipment servicing.

For procurement, confirm the product name, packaging, manufacturer identification and batch details with the supplier before placing an order. For application-specific guidance, consult the official MOLYKOTE documentation.

Buy MOLYKOTE TP-42 Paste from Technosteer Online

Technosteer Online supplies industrial maintenance products and specialty lubricants for business and workshop requirements. Choose MOLYKOTE TP-42 Paste – 1 Kg Pack when the application calls for an adhesive lubricant paste designed for heavily loaded metallic sliding surfaces.

For bulk requirements, availability confirmation or assistance with industrial procurement, contact the Technosteer Online team.

Important: Select lubricants according to the equipment manufacturer’s specifications. Review the current product technical data sheet and safety data sheet before use.